RC MAKER 5019 - Floating Electronics Plate Brass Plate (11.5g) (Option) SP1-F Option Parts which uses an O-ring to

which uses an O-ring to secure the battery

As different manufacturers using different tolerances for the production of their splines (even they are the same teeth numbers) it's rather impossible to create a perfect fit servo arm without the use of a clamping design

8mm Set adds 10g of weight at the lowest point of the car

Awesomatix A800FX Evo Rear Stiffener

weight: 14

RC MAKER 5019 - Floating Electronics Plate Brass Plate (11.5g) (Option) SP1-F Option Parts which uses an O-ring toOptional Floating Electronics Plate Brass Plate (11. 5g) for RC MAKER SP1 This optional Floating Electronics Plate screws to Floating Electronics Plate Bulkhead. The set can be purchased HERE. This is a spare plate and can be used to have a second set of electronics mounted for quickly swapping out. You could also tape this plate directly to the chassis for weight, if you aren't interested in the floating capabilities of using the set. Manufactured